File Download

There are no files associated with this item.

  • Find it @ UNIST can give you direct access to the published full text of this article. (UNISTARs only)
Related Researcher

신명수

Shin, Myoungsu
Read More

Views & Downloads

Detailed Information

Cited time in webofscience Cited time in scopus
Metadata Downloads

Discussion of ‘distinction between punching and flexural failure modes of flat plates’

Author(s)
Shin, MyoungsuGrossman, Jacob
Issued Date
2008-03
URI
https://scholarworks.unist.ac.kr/handle/201301/9941
Citation
ACI STRUCTURAL JOURNAL, v.105, no.2, pp.240 - 241
Abstract
In particular, he criticizes that the shear strengths' equations in these sources do not include n.\n The design steps in practice are: select the thickness of the flat plate as a ratio of the span to avoid excessive deflection; determine n values at midspans and at the supports, to resist the bending moments obtained by elastic analyses for the loading cases that produce maximum positive and maximum negative values due to factored loads; check the punching shear strength to ensure that it exceeds the maximum demand with the appropriate loading case; and provide shear reinforcing means if necessary. Scarce tests on three-dimensional structures give information on the behavior of the entire structure (for example, Sherif [1996], Sherif and Dilger [2001], and Dechka [2001]), and at the same time confirm that the behavior of the zone of the slab-column connections can be safely predicted by tests on isolated specimens, for the same V, or V combined with M. REFERENCES Dechka, D. C., 2001, "Response of Shear-Stud-Reinforced Continuous Slab-Column Frames to Seismic Loads," PhD thesis, University of Calgary, Calgary, AB, Canada, 2001, 472 pp.
Publisher
AMER CONCRETE INST
ISSN
0889-3241

qrcode

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.