File Download

There are no files associated with this item.

  • Find it @ UNIST can give you direct access to the published full text of this article. (UNISTARs only)
Related Researcher

BielawskiChristopher W

Bielawski, Christopher W.
Read More

Views & Downloads

Detailed Information

Cited time in webofscience Cited time in scopus
Metadata Downloads

Transport and retention of aqueous dispersions of superparamagnetic nanoparticles in sandstone

Author(s)
Yu, H.Yoon, K. Y.Neilson, B. M.Bagaria, H. G.Worthen, A. J.Lee, J. H.Cheng, V.Bielawski, C. W.Johnston, K. P.Bryant, S. L.Huh, C.
Issued Date
2014-04
DOI
10.1016/j.petrol.2013.08.053
URI
https://scholarworks.unist.ac.kr/handle/201301/31462
Fulltext
https://www.sciencedirect.com/science/article/pii/S0920410514000424?via%3Dihub
Citation
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, v.116, pp.115 - 123
Abstract
We evaluate the transport of surface-treated superparamagnetic iron-oxide nanoparticles in Boise-sandstone rocks by injecting aqueous dispersions of the particles into core plugs. Several different surface treatments yield stable dispersions of these particles, but provide very different transport characteristics. Effluent concentration histories are measured to obtain the particle retention in the rock. The results are used to optimize the particle surface coating so that the reservoir application requirements for the functional nanoparticles can be achieved. The application of interest here requires the nanoparticles to adsorb to oil/water interfaces. Our earlier experiments (Yu et al., 2010) showed that the paramagnetic nanoparticles stabilized with small negatively-charged citrate ligands have little retention in sedimentary rocks, but their preferred adsorption at the oil/water interfaces in rock pores was not achieved. A major improvement in surface coating optimization is achieved by creating a crosslinked polymer film that wraps around the nanoparticle so that it does not detach from the particle surface even under the harsh reservoir conditions. To fine-tune the coating to satisfy the reservoir application requirements, co-polymers and ter-polymers with different constituent monomers are employed. Nanoparticles stabilized with (polystyrene sulfonate-alt-maleic acid) coating show a good adsorption tendency at the oil/water interfaces, while with very low adsorption at rock surface (similar to 0.02 mg/m(2)). The dispersion also has long-term stability even at high salinity (8 wt% NaCl). Other polymers, such as (polyacrylic acid-r-butyl acrylate), (polyacrylic acid-b-styrene sulfonic acid), and (polyacrylic acid-r-butyl acrylate-b-styrene sulfonic acid), were also tested. The coating with the last polymer (PAA-PBA-PSS) provides a very low retention of particles in the rock, but only marginal preferred adsorption at oil/water interfaces. (C) 2014 Elsevier B.V. All rights reserved.
Publisher
ELSEVIER SCIENCE BV
ISSN
0920-4105
Keyword (Author)
superparamagnetic nanoparticlesnanotechnologynanoparticle transportnanoparticlesurface coating
Keyword
NANOCLUSTERS

qrcode

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.