dc.citation.endPage |
34 |
- |
dc.citation.startPage |
31 |
- |
dc.citation.title |
MATERIALS LETTERS |
- |
dc.citation.volume |
64 |
- |
dc.contributor.author |
Park, Sung Soo |
- |
dc.contributor.author |
Tang, W. N. |
- |
dc.contributor.author |
You, B. S. |
- |
dc.date.accessioned |
2023-12-22T07:36:11Z |
- |
dc.date.available |
2023-12-22T07:36:11Z |
- |
dc.date.created |
2014-10-23 |
- |
dc.date.issued |
2010-01 |
- |
dc.description.abstract |
The microstructure and mechanical properties of an indirect-extruded Mg-8Sn-1Al-1Zn (TAZ811) alloy were investigated and compared with those of a commercial Mg-3Al-1Zn (AZ31) alloy. In the extruded condition, the TAZ811 alloy shows a much smaller grain size but a stronger basal texture than the AZ31 alloy. In addition, the TAZ811 alloy contains fine Mg(2)Sn particles in the microstructure, whereas the AZ31 alloy reveals relatively coarse and sparse Al-Mn particles. The TAZ811 alloy showed tensile and compressive strengthening as well as a reduction in yield asymmetry between tension and compression, which is mainly due to grain refinement and the presence of fine Mg(2)Sn particles. |
- |
dc.identifier.bibliographicCitation |
MATERIALS LETTERS, v.64, pp.31 - 34 |
- |
dc.identifier.doi |
10.1016/j.matlet.2009.09.062 |
- |
dc.identifier.issn |
0167-577X |
- |
dc.identifier.scopusid |
2-s2.0-70350721614 |
- |
dc.identifier.uri |
https://scholarworks.unist.ac.kr/handle/201301/7601 |
- |
dc.identifier.url |
http://www.scopus.com/inward/record.url?partnerID=HzOxMe3b&scp=70350721614 |
- |
dc.identifier.wosid |
000272775900011 |
- |
dc.language |
영어 |
- |
dc.publisher |
ELSEVIER SCIENCE BV |
- |
dc.title |
Microstructure and mechanical properties of an indirect-extruded Mg-8Sn-1Al-1Zn alloy |
- |
dc.type |
Article |
- |
dc.description.journalRegisteredClass |
scie |
- |
dc.description.journalRegisteredClass |
scopus |
- |