There are no files associated with this item.
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.citation.endPage | 435 | - |
dc.citation.number | 1-2 | - |
dc.citation.startPage | 431 | - |
dc.citation.title | JOURNAL OF POWER SOURCES | - |
dc.citation.volume | 146 | - |
dc.contributor.author | Lee, YM | - |
dc.contributor.author | Choi, Nam-Soon | - |
dc.contributor.author | Lee, JA | - |
dc.contributor.author | Seol, WH | - |
dc.contributor.author | Cho, KY | - |
dc.contributor.author | Jung, HY | - |
dc.contributor.author | Kim, JW | - |
dc.contributor.author | Park, JK | - |
dc.date.accessioned | 2023-12-22T10:15:14Z | - |
dc.date.available | 2023-12-22T10:15:14Z | - |
dc.date.created | 2014-10-01 | - |
dc.date.issued | 2005-08 | - |
dc.description.abstract | The coated separator was prepared by coating poly(vinyl acetate) (PVAc) on the surface of the novel separator based on poly(vinylidene fluoride) (PVdF) and polyethylene (PE) non-woven matrix. The ionic conductivity of the coated separator was 1.1 × 10-3 S cm-1 at 25 °C, a little higher than that of bare separator. The coated separator showed smoother surface morphology and better adhesion property toward electrodes, and thereby it resulted in lower total resistance than the bare separator. The discharge capacity of the unit cell with coated separator at C/2 rate was maintained at about 84% of the theoretical capacity, which is quite higher than that of the unit cell with the bare separator. | - |
dc.identifier.bibliographicCitation | JOURNAL OF POWER SOURCES, v.146, no.1-2, pp.431 - 435 | - |
dc.identifier.doi | 10.1016/j.jpowsour.2005.03.047 | - |
dc.identifier.issn | 0378-7753 | - |
dc.identifier.scopusid | 2-s2.0-24944575710 | - |
dc.identifier.uri | https://scholarworks.unist.ac.kr/handle/201301/6673 | - |
dc.identifier.url | http://www.scopus.com/inward/record.url?partnerID=HzOxMe3b&scp=24944575710 | - |
dc.identifier.wosid | 000232756700085 | - |
dc.language | 영어 | - |
dc.publisher | ELSEVIER SCIENCE BV | - |
dc.title | Electrochemical effect of coating layer on the separator based on PVdF and PE non-woven matrix | - |
dc.type | Article | - |
dc.description.journalRegisteredClass | scopus | - |
dc.subject.keywordAuthor | coated separator | - |
dc.subject.keywordAuthor | poly(vinyl acetate) | - |
dc.subject.keywordAuthor | poly(vinylidene fluoride) | - |
dc.subject.keywordAuthor | polyethylene non-woven matrix | - |
dc.subject.keywordAuthor | phase inversion | - |
dc.subject.keywordAuthor | rechargeable lithium battery | - |
dc.subject.keywordPlus | LITHIUM-ION BATTERIES | - |
dc.subject.keywordPlus | POROUS SEPARATOR | - |
dc.subject.keywordPlus | MEMBRANES | - |
Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Tel : 052-217-1404 / Email : scholarworks@unist.ac.kr
Copyright (c) 2023 by UNIST LIBRARY. All rights reserved.
ScholarWorks@UNIST was established as an OAK Project for the National Library of Korea.