There are no files associated with this item.
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.citation.endPage | 346 | - |
dc.citation.startPage | 342 | - |
dc.citation.title | ENERGY CONVERSION AND MANAGEMENT | - |
dc.citation.volume | 76 | - |
dc.contributor.author | Kim, Kwiyong | - |
dc.contributor.author | Kim, Dong Yeon | - |
dc.contributor.author | Lee, Ki Rak | - |
dc.contributor.author | Han, Jong-In | - |
dc.date.accessioned | 2023-12-22T03:09:44Z | - |
dc.date.available | 2023-12-22T03:09:44Z | - |
dc.date.created | 2023-02-13 | - |
dc.date.issued | 2013-12 | - |
dc.description.abstract | In this study, an innovative iron EDTA-based H2S capture technology was proposed. Just like currently available approaches, this system allows to capture H2S and convert it into element sulfur. It does so, however, with net energy production and without absorbent degradation. The system, consisting of an absorber and a fuel cell units, absorbs gaseous H2S and oxidize it to elemental sulfur in the absorber compartment, and in the fuel cell unit converts the reduced form of the absorbent [Fe(II)EDTA](2-) back to [Fe(III)EDTA](-), generating electricity. When solution pH was raised from 7 to 10, more gaseous H2S was absorbed into [Fe(III)EDTA](-), resulting in increased production [Fe(II)EDTA](2-). This reduced form of the absorbent, which should be subsequently regenerated for continuous operation, serves as a fuel in a Fe(II)-based fuel cell. Fuel cell performance was also found to be strongly affected by solution pH, and the highest maximum power density of 0.832 mW cm(-2) was achieved at pH 9 and 60 degrees C. At this condition, more than 80% of [Fe(III)EDTA](-) was recovered from [Fe(II)EDTA](2-) in 2 h without any noticeable degradation of EDTA, amounted to the oxidation rate of 147 g Fe h(-1) m(2) anode surface area. This study provides demonstration of many desirable aspects for field implementation, such as electricity generation, sulfur recovery and long-term stability of the absorbent. (C) 2013 Elsevier Ltd. All rights reserved. | - |
dc.identifier.bibliographicCitation | ENERGY CONVERSION AND MANAGEMENT, v.76, pp.342 - 346 | - |
dc.identifier.doi | 10.1016/j.enconman.2013.07.063 | - |
dc.identifier.issn | 0196-8904 | - |
dc.identifier.scopusid | 2-s2.0-84883156197 | - |
dc.identifier.uri | https://scholarworks.unist.ac.kr/handle/201301/62133 | - |
dc.identifier.wosid | 000327576800037 | - |
dc.language | 영어 | - |
dc.publisher | PERGAMON-ELSEVIER SCIENCE LTD | - |
dc.title | Electricity generation from iron EDTA-based liquid redox sulfur recovery process with enhanced stability of EDTA | - |
dc.type | Article | - |
dc.description.isOpenAccess | FALSE | - |
dc.relation.journalWebOfScienceCategory | Thermodynamics; Energy & Fuels; Mechanics | - |
dc.relation.journalResearchArea | Thermodynamics; Energy & Fuels; Mechanics | - |
dc.type.docType | Article | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.subject.keywordAuthor | Hydrogen sulfide | - |
dc.subject.keywordAuthor | Fuel cell | - |
dc.subject.keywordAuthor | Electricity | - |
dc.subject.keywordAuthor | Liquid redox sulfur recovery | - |
dc.subject.keywordAuthor | EDTA degradation | - |
dc.subject.keywordPlus | HYDROGEN-SULFIDE CONVERSION | - |
dc.subject.keywordPlus | SPECTROPHOTOMETRIC DETERMINATION | - |
dc.subject.keywordPlus | ELECTROCHEMICAL REGENERATION | - |
dc.subject.keywordPlus | REMOVAL | - |
dc.subject.keywordPlus | ABSORPTION | - |
dc.subject.keywordPlus | REDUCTION | - |
dc.subject.keywordPlus | EVOLUTION | - |
dc.subject.keywordPlus | OXIDATION | - |
dc.subject.keywordPlus | SYSTEM | - |
Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Tel : 052-217-1404 / Email : scholarworks@unist.ac.kr
Copyright (c) 2023 by UNIST LIBRARY. All rights reserved.
ScholarWorks@UNIST was established as an OAK Project for the National Library of Korea.