There are no files associated with this item.
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.citation.endPage | 1385 | - |
dc.citation.number | 5 | - |
dc.citation.startPage | 1374 | - |
dc.citation.title | IEEE JOURNAL OF SOLID-STATE CIRCUITS | - |
dc.citation.volume | 55 | - |
dc.contributor.author | Shin, Se-Un | - |
dc.contributor.author | Choi, Minseong | - |
dc.contributor.author | Jung, Seungchul | - |
dc.contributor.author | Lee, Hyung-Min | - |
dc.contributor.author | Cho, Gyu-Hyeong | - |
dc.date.accessioned | 2023-12-21T17:37:21Z | - |
dc.date.available | 2023-12-21T17:37:21Z | - |
dc.date.created | 2021-02-10 | - |
dc.date.issued | 2020-05 | - |
dc.description.abstract | This article proposes a resonant voltage mode receiver (RVM-Rx) as a new topology of a wireless power receiver for battery charging. With a resonant capacitor interleaving scheme, an LC tank in the receiver can always be configured and isolated from the output, leading to optimal power transfer regardless of the operation phase. Thus, the power transfer efficiency is not sensitive to load conditions, such as battery voltage variation. In the RVM-Rx, a diode-based voltage peak time detection (VPTD) technique enables the system operation at a high resonant frequency. Also, a delay-based control scheme with a minimum diode time tracking loop (MDTL) and an optimum duty tracking loop (ODTL) leads to efficient power conversion by adaptively adjusting the operation state. The RVM-Rx prototype in a 0.18-mu m CMOS process can operate at a high resonant frequency of 13.56 MHz with a small RX coil (7 mm x 7 mm), while achieving a maximum receiver power efficiency of 67.8% for battery charging. | - |
dc.identifier.bibliographicCitation | IEEE JOURNAL OF SOLID-STATE CIRCUITS, v.55, no.5, pp.1374 - 1385 | - |
dc.identifier.doi | 10.1109/JSSC.2019.2947237 | - |
dc.identifier.issn | 0018-9200 | - |
dc.identifier.scopusid | 2-s2.0-85083966887 | - |
dc.identifier.uri | https://scholarworks.unist.ac.kr/handle/201301/50003 | - |
dc.identifier.url | https://ieeexplore.ieee.org/document/8886438 | - |
dc.identifier.wosid | 000530283400021 | - |
dc.language | 영어 | - |
dc.publisher | IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC | - |
dc.title | A Time-Interleaved Resonant Voltage Mode Wireless Power Receiver With Delay-Based Tracking Loops for Implantable Medical Devices | - |
dc.type | Article | - |
dc.description.isOpenAccess | FALSE | - |
dc.relation.journalWebOfScienceCategory | Engineering, Electrical & Electronic | - |
dc.relation.journalResearchArea | Engineering | - |
dc.type.docType | Article | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.subject.keywordAuthor | Delay-based control | - |
dc.subject.keywordAuthor | implantable medical device (IMD) | - |
dc.subject.keywordAuthor | inductive link | - |
dc.subject.keywordAuthor | peak time detector | - |
dc.subject.keywordAuthor | power management | - |
dc.subject.keywordAuthor | time-interleaved scheme | - |
dc.subject.keywordAuthor | wireless power transfer (WPT) | - |
dc.subject.keywordPlus | DESIGN | - |
dc.subject.keywordPlus | SENSOR | - |
dc.subject.keywordPlus | SYSTEM | - |
Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Tel : 052-217-1404 / Email : scholarworks@unist.ac.kr
Copyright (c) 2023 by UNIST LIBRARY. All rights reserved.
ScholarWorks@UNIST was established as an OAK Project for the National Library of Korea.