There are no files associated with this item.
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.citation.conferencePlace | US | - |
dc.citation.conferencePlace | Anaheim | - |
dc.citation.title | ASME 2014 Pressure Vessels and Piping Conference, PVP 2014 | - |
dc.citation.volume | 6A | - |
dc.contributor.author | Yoo, Seung Chang | - |
dc.contributor.author | Choi, Kyoung Joon | - |
dc.contributor.author | Kim, Ji Hyun | - |
dc.date.accessioned | 2023-12-19T23:39:13Z | - |
dc.date.available | 2023-12-19T23:39:13Z | - |
dc.date.created | 2014-12-09 | - |
dc.date.issued | 2014-07-20 | - |
dc.description.abstract | In order to investigate the long-term thermal aging effects on the type-II boundary region in Alloy 152 weld metal, a representative dissimilar weld mock-up made of Alloy 690-Alloy 152-A533 Gr. B has been fabricated and heat treated under accelerated temperature conditions. To simulate the thermal aging effects, the heat treatment was performed at 450°C for 15, 30 and 60-yr equivalent times (1, 375, 2, 750 and 5, 500 h). The aging time was determined by the diffusion equation based on the activation energy for chromium diffusion. The microstructure characterization was primarily conducted in the type-II boundary region of the weld root, which is a boundary parallel to fusion boundary existing within 100um from the fusion boundary and is known to be less resistant to stress corrosion cracking than other regions in the weld. The investigations were performed by scanning electron microscope, electron backscatter diffraction, and nanoindentation test. In this study, the dilution zone of the chromium content was observed at the weld metal region within a 1.5-mm range from the fusion boundary. Ferrites and high angle grain boundaries are found at the type-II boundary region of weld metal. In the narrow zone between the type-II boundary and fusion boundary, the hardness is relatively higher than that of other regions. These results show that the chromium content in the dilution zone increases with heat treatment, but the stiff chemical gradient still exists in the weld region at the narrow zone between the type-II boundary and fusion boundary. | - |
dc.identifier.bibliographicCitation | ASME 2014 Pressure Vessels and Piping Conference, PVP 2014, v.6A | - |
dc.identifier.doi | 10.1115/PVP2014-28700 | - |
dc.identifier.isbn | 978-079184603-2 | - |
dc.identifier.issn | 0277-027X | - |
dc.identifier.scopusid | 2-s2.0-84911981765 | - |
dc.identifier.uri | https://scholarworks.unist.ac.kr/handle/201301/46721 | - |
dc.identifier.url | http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1938193 | - |
dc.language | 영어 | - |
dc.publisher | ASME 2014 Pressure Vessels and Piping Conference, PVP 2014 | - |
dc.title | Thermal aging effects on microstructures of type-II boundary in dissimilar metal weld joints | - |
dc.type | Conference Paper | - |
dc.date.conferenceDate | 2014-07-20 | - |
Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Tel : 052-217-1404 / Email : scholarworks@unist.ac.kr
Copyright (c) 2023 by UNIST LIBRARY. All rights reserved.
ScholarWorks@UNIST was established as an OAK Project for the National Library of Korea.