There are no files associated with this item.
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.citation.endPage | 955 | - |
dc.citation.number | 8 | - |
dc.citation.startPage | 948 | - |
dc.citation.title | HARBIN GONGCHENG DAXUE XUEBAO/JOURNAL OF HARBIN ENGINEERING UNIVERSITY | - |
dc.citation.volume | 33 | - |
dc.contributor.author | Qiu, Hai | - |
dc.contributor.author | Xiong, Shuping | - |
dc.contributor.author | Qu, Shipeng | - |
dc.date.accessioned | 2023-12-22T04:47:14Z | - |
dc.date.available | 2023-12-22T04:47:14Z | - |
dc.date.created | 2013-10-10 | - |
dc.date.issued | 2012-08 | - |
dc.description.abstract | In order to estimate the hull panel roll bending processing time accurately, first, both the panel's elastic and plastic deformations in the hull panel roll bending processing were analyzed along with the final state after roll bending processing. Then, a model of hull panel processing time was developed. The model was further evaluated by comparing its estimated processing time for different hull panels with the practically measured data. The results show no significant difference between the top roll positions calculated based on elastic and plastic deformation theory and the actual positions. There was no significant difference in processing time between the estimation from the proposed model and the actual measured processing time; all estimated errors were within 10% (the average error was 5%). Therefore, the proposed estimation model of ship plate processing time based on elastic and plastic deformation theory is reasonable and feasible for real practice. | - |
dc.identifier.bibliographicCitation | HARBIN GONGCHENG DAXUE XUEBAO/JOURNAL OF HARBIN ENGINEERING UNIVERSITY, v.33, no.8, pp.948 - 955 | - |
dc.identifier.doi | 10.3969/j.issn.1006-7043.201110013 | - |
dc.identifier.issn | 1006-7043 | - |
dc.identifier.scopusid | 2-s2.0-84867599535 | - |
dc.identifier.uri | https://scholarworks.unist.ac.kr/handle/201301/4155 | - |
dc.language | 중국어 | - |
dc.publisher | Haerbin Gongcheng Daxue/Harbin Engineering University | - |
dc.title | The processing time estimation of the hull panel roll bending based on elastic and plastic deformation theory | - |
dc.type | Article | - |
dc.description.journalRegisteredClass | scopus | - |
dc.subject.keywordAuthor | Elastic and plastic deformation theory | - |
dc.subject.keywordAuthor | Final state of roll bending | - |
dc.subject.keywordAuthor | Hull panel processing | - |
dc.subject.keywordAuthor | Processing time estimation | - |
dc.subject.keywordAuthor | Top roll position | - |
Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Tel : 052-217-1404 / Email : scholarworks@unist.ac.kr
Copyright (c) 2023 by UNIST LIBRARY. All rights reserved.
ScholarWorks@UNIST was established as an OAK Project for the National Library of Korea.