dc.citation.endPage |
91 |
- |
dc.citation.number |
1 |
- |
dc.citation.startPage |
83 |
- |
dc.citation.title |
한국전자파학회 논문지 |
- |
dc.citation.volume |
7 |
- |
dc.contributor.author |
김학선 |
- |
dc.contributor.author |
이창석 |
- |
dc.contributor.author |
이형재 |
- |
dc.date.accessioned |
2023-12-22T12:39:56Z |
- |
dc.date.available |
2023-12-22T12:39:56Z |
- |
dc.date.created |
2017-03-15 |
- |
dc.date.issued |
1996-03 |
- |
dc.description.abstract |
The SPICE circuit analysis program has a limited math capability and, in general, cannot be used for RF and microwave simulation because a complex arithmetic is required to compute S parameters from node voltages. This paper presents two test bench models that can be used to obtain node voltages proportional to incident, reflected, and transmitted signals. From SPICE computed node voltages, S parameters are computed using the math capability of the PSPICE post processor, PROBE, as an example for a low-pass filter consisting of transmission line sections. The result of this example are compared with another high frequency circuit analysis program, TOUCHSTONE. The difference between the results of these two programs in magnitude was less than 0.003 and in phase was a few tenths of a degree. By using these test benchs to simulate a filter, RF and microwave analysis can be made with the SPICE, which can be a cost-effective and readily available computational tool for educators and practicing engineers. |
- |
dc.identifier.bibliographicCitation |
한국전자파학회 논문지, v.7, no.1, pp.83 - 91 |
- |
dc.identifier.issn |
1226-3133 |
- |
dc.identifier.uri |
https://scholarworks.unist.ac.kr/handle/201301/21649 |
- |
dc.identifier.url |
http://www.dbpia.co.kr/Journal/ArticleDetail/NODE00257490 |
- |
dc.language |
한국어 |
- |
dc.publisher |
한국전자파학회 |
- |
dc.title.alternative |
A Study on the RF and Microwave Circuit Analysis in the SPICE |
- |
dc.title |
SPICE에서의 RF와 Microwave회로 해석에 관한 연구 |
- |
dc.type |
Article |
- |
dc.description.journalRegisteredClass |
other |
- |