TY - JOUR
AU - Lee, Jae Hwa
AU - Lee, Seung-Hyun
AU - Kim, Kyoungyoun
AU - Sung, Hyung Jin
DA - 2009/12
UR - https://scholarworks.unist.ac.kr/handle/201301/9729
UR - https://linkinghub.elsevier.com/retrieve/pii/S0142727X09001222
AB - Turbulent coherent structures near a rod-roughened wall are scrutinized by analyzing instantaneous flow fields obtained from direct numerical simulations (DNSs) of a turbulent boundary layer (TBL). The roughness elements used are periodically arranged two-dimensional spanwise rods, and the roughness height is k/δ = 0.05 where δ is the boundary layer thickness. The Reynolds number based on the momentum thickness is varied in the range Reθ = 300-1400. The effect of surface roughness is examined by comparing the characteristics of the TBLs over smooth and rough walls. Although introduction of roughness elements onto the smooth wall affects the Reynolds stresses throughout the entire boundary layer when scaled by the friction velocity, the roughness has little effect on the vorticity fluctuations in the outer layer. Pressure-strain tensors of the transport equation for the Reynolds stresses and quadrant analysis disclose that the redistribution of turbulent kinetic energy of the rough wall is similar to that of the smooth wall, and that the roughness has little effect on the relative contributions of ejection and sweep motions in the outer layer. To elucidate the modifications of the near-wall vortical structure induced by surface roughness, we used two-point correlations, joint weighted probability density function, and linear stochastic estimation. Finally, we demonstrate the existence of coherent structures in the instantaneous flow field over the rod-roughened surface.
LA - ENG
PB - ELSEVIER SCIENCE INC
KW - Direct numerical simulation
KW - Roughness sublayer
KW - Surface roughness
KW - Turbulent boundary layer
KW - Turbulent vortical structure
TI - Structure of the turbulent boundary layer over a rod-roughened wall
DO - 10.1016/j.ijheatfluidflow.2009.08.002
ER -