| 2006-12 | A two-zone method with an enhanced accuracy for a numerical solution of the diffusion equation | Cheon, Jin-Sik; Koo, Yang-Hyun; Lee, Byung-Ho; Oh, Je-Yong; Sohn, Dong-Seong | ARTICLE | 1495 |
| 2008-02 | An extension of the two-zone method for evaluating a fission gas release under an irradiation-induced resolution flux | Cheon, Jin-Sik; Koo, Yang-Hyun; Lee, Byung-Ho; Oh, Jae-Yong; Sohn, Dong-Seong | ARTICLE | 586 |
| 2017-04 | Application of a Dynamic-Nanoindentation Method to Analyze the Local Structure of an Fe-18 at.% Gd Cast Alloy | Choi, Yong; Baik, Youl; Moon, Byung M.; Sohn, Dong-Seong | ARTICLE | 447 |
| 2008-07 | Behavior of unirradiated Zr based uranium metal fuel under reactivity initiated accident conditions | Koo, Yang-Hyun; Lee, Chong-Tak; Oh, Je-Yong; Sohn, Dong-Seong; Baryshnikov, M.; Chechurov, A.; Margulis, B. | ARTICLE | 465 |
| 2008-01 | Characteristics of GdxMyOz (M = Ti, Zr or Al) as a burnable absorber | Kim, Han Soo; Joung, Chang Yong; Lee, Byung Ho; Kim, Si Hyung; Sohn, Dong-Seong | ARTICLE | 534 |
| 2019-02 | Corrosion and mechanical properties of hot-rolled 0.5%Gd-0.8%B-stainless steels in a simulated nuclear waste treatment solution | Jung, Moo Young; Baik, Youl; Choi, Yong; Sohn, Dong-Seong | ARTICLE | 145 |
| 2016-02 | Corrosion and Wear Properties of Cold Rolled 0.087% Gd Lean Duplex Stainless Steels for Neutron Absorbing Material | Choi, Yong; Baik, Youl; Moon, Byung M.; Sohn, Dong-Seong | ARTICLE | 663 |
| 2018-12 | Dependence of thickness, morphology, and crystallographic properties of Mo and ZrN coatings on U-Mo substrate size | Kim, Ji-Hyeon; Jeong, Gwan Yoon; Kim, Sunghwan; Jeong, Yong Jin; Park, Jong Man; Sohn, Dong-Seong | ARTICLE | 256 |
| 2019-08 | Development of integral type spent fuel pool storage rack with gadolinium and europium-containing structure materials | Kim, Mi Jin; Kim, Wonkyeong; Lee, Deokjung; Lemaire, Matthieu; Lee, Hee-Jae; Sohn, Dong-Seong; Kwon, Hyukjoo | ARTICLE | 139 |
| 2018-04 | Development of PRIME for irradiation performance analysis of U-Mo/Al dispersion fuel | Jeong, Gwan Yoon; Kim, Yeon Soo; Jeong, Young Jin; Park, Jong Man; Sohn, Dong-Seong | ARTICLE | 359 |
| 2002 | Effect of Ball-mill Treatment on Power Characteristics, Compaction and Sintering Behaviors of ex-AUC and ex-ADU UO₂Powder | Na, Sang-Ho; Kim, Si-Hyung; Lee, Young-Woo; Sohn, Dong-Seong | ARTICLE | 510 |
| 2018-08 | Effect of coating thickness and annealing temperature on ZrN coating failure of U-Mo particles under heat treatment | Kim, Ji-Hyeon; Jeong, Gwan Yoon; Kim, Sunghwan; Jeong, Yong Jin; Sohn, Dong-Seong | ARTICLE | 180 |
| 2015-11 | Effect of gadolinium addition on the corrosion, wear, and neutron absorbing behaviors of duplex stainless steel sheet | Baik, Youl; Choi, Yong; Moon, Byung M.; Sohn, Dong-Seong; Bogdanov, Simeon G.; Pirogov, Alexander N. | ARTICLE | 379 |
| 2017-08 | Effect of Gd-alloyed Neutron Absorber on Thermal Performance of a Spent Fuel Cask | Sohn, Dong-Seong; Lee, Hee-Jae | Master's thesis | 294 |
| 2019-03 | Effect of pre-oxidation temperature on the ductility of a zirconium alloy cladding under simulated accident conditions | Lee, Cheol Min; Lee, Hee-Jae; Kim, Hyun-Gil; Mok, Yong-Kyoon; Han, Young-Soo; Sohn, Dong-Seong | ARTICLE | 157 |
| 2017-04 | Effect of stress evolution on microstructural behavior in U-Mo/Al dispersion fuel | Jeong, G.Y.; Kim, Yeon Soo; Jamison, L.M.; Robinson, A.B.; Lee, K.H.; Sohn, Dong-Seong | ARTICLE | 474 |
| 2018-02 | Enhanced high-temperature oxidation resistance of a zirconium alloy cladding by high-temperature preformed oxide on the cladding | Lee, Cheol Min; Sohn, Dong-Seong | ARTICLE | 456 |
| 2004-06 | Evaluation of a pellet-clad mechanical interaction in mixed oxide fuels during power transients by using axisymmetric finite element modeling | Cheon, JS; Lee, BH; Koo, YH; Oh, JY; Sohn, Dong-Seong | ARTICLE | 483 |
| 2006-06 | Fabrication method and thermal conductivity assessment of molybdenum-precipitated uranium dioxide pellets | Kim, SH; Joung, CY; Kim, HS; Lee, YW; Ryu, HJ; Sohn, Dong-Seong; Kim, DJ | ARTICLE | 455 |
| 2008-04 | Fabrication method for UO2 pellets with large grains or a single grain by sintering in air | Joung, Chang Young; Lee, Soo Chul; Kim, Si Hyung; Kim, Han Soo; Sohn, Dong-Seong | ARTICLE | 1145 |
