Laminar morphology development and oxygen permeability of LDPE/EVOH blends
Cited 55 times inCited 59 times in
- Laminar morphology development and oxygen permeability of LDPE/EVOH blends
- Lee, Sang-Young; Kim, SC
- STYRENE TRIBLOCK COPOLYMERS; POLYMER BLENDS; POLYETHYLENE BLENDS; EXTRUSION; POLY(ETHYLENE-TEREPHTHALATE); RHEOLOGY; BEHAVIOR
- Issue Date
- POLYMER ENGINEERING AND SCIENCE, v.37, no.2, pp.463 - 475
- Morphology and oxygen barrier properties of LDPE/EVOH blends have been studied. Laminar dispersion of ethylene-vinyl alcohol copolymer (EVOH) with high oxygen barrier properties was obtained in the matrix of low density polyethylene (LDPE) when extruded through an annular blown film die. Various laminar morphologies were observed and the main factors determining the morphology of the blends were viscosity ratio of the components, processing conditions, and compatibilizer level. Oxygen permeation tests have shown that thinner and longer EVOH layers in larger numbers were more effective in reducing the oxygen permeability. The oxygen permeability of the compatibilized blend having 6 phr of LLD-g-MAH was reduced by a factor of 740. The correlation between morphology and oxygen permeability was explained as a function of the EVOH layer size (L × R) and the number of EVOH layers (N), which were closely related to the predeformed domain size (Lo × Ro). The high Weber number (resulted from large Lo × Ro and low interfacial tension) and low viscosity ratio yielded large L × R. However, small Lo × Ro produced high N. Experimental results of oxygen permeability were well correlated with (L × R) × N.
- ; Go to Link
Appears in Collections:
- ECHE_Journal Papers
can give you direct access to the published full text of this article. (UNISTARs only)
Show full item record
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.