Phase transition of bare and coated LixCoO2 (x=0.4 and 0.24) at 300 degrees C
Cited 7 times inCited 7 times in
- Phase transition of bare and coated LixCoO2 (x=0.4 and 0.24) at 300 degrees C
- Lee, Youngil; Kim, Min Gyu; Kim, Jisuk; Kim, Yoojin; Cho, Jaephil
- Coatings; Electric potential; Nuclear magnetic resonance; Phase transitions; Thermodynamic stability
- Issue Date
- ELECTROCHEMICAL SOC INC
- JOURNAL OF THE ELECTROCHEMICAL SOCIETY, v.152, no.9, pp.A1824 - A1827
- The phase transitions of the bare and AlPO4-coated delithiated LixCoO2 (x = 0.4 and 0.24) according to the coating concentration (thickness) after heat-treatment at 300°C was investigated using nuclear magnetic resonance and X-ray absorption spectra. It was found that the bare and coated LixCoO2 predominantly decomposed into spinel LixCo2O4 or Co3O4 phases depending on the charging voltage. As the charging voltage was increased from 4.3 to 4.6 V, the bare and 1 wt % AlPO4-coated LixCoO 2 decomposed into the LixCo2O4 phase while the 2.4 wt % AlPO4-coated sample decomposed into the Co 3O4 phase. The improvement in the thermal stability of the 2.4 wt % AlPO4-coated LixCoO2, compared to the bare and 1 wt % AlPO4-coated samples, could be explained by the dominant local formation of the Co3O4 phase over the LixCo2O4 phase.
- ; Go to Link
Appears in Collections:
- ECHE_Journal Papers
can give you direct access to the published full text of this article. (UNISTARs only)
Show full item record
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.