Determination of effects of production parameters on the viability of polycarbonate films for achieving in-mold decoration in resin infused composite components

Abstract

This article details the behavior of polycarbonate films utilized in the resin infusion between double flexible tooling (RIDFT) process as means to achieve in-mold decoration (IMD) of composites. This work evaluated forming capability with respect to surface quality of the composite assembly. Improved drawability was achieved with increasing temperature. However, this yielded in print-through of the fibers through the film. Five process parameters (temperature, mold type, time, fiber reinforcements, and vacuum pull), were optimized through sequential experimentation using analysis of variance (ANOVA) in terms of print-through, as the response variable. Statistical validation indicated minimal print-through at a forming temperature of 147 degrees C. However, at this temperature formability of the film was limited to subtle contours. At 160 degrees C, the forming capability of the composite assembly was maximized, yet surface finishes exhibited high print-through. This article describes achievements, difficulties, and future work in the utilization of polycarbonate films for the RIDFT process.