A helical-type direct current (DC) electromagnetic pump with a developed pressure of 10 kPa and flow rate of 0.005 m(3)/s was analyzed at a temperature of 226 degrees C for an active decay heat-removal system (ADHRS) of a prototype GenIV sodium fast reactor. The rectangular-type DC electromagnetic pump, which was selected for the ADHRS, required a very large current (>1000 A). A helical-type DC electromagnetic pump was considered to provide multiple current to a pump duct to reduce the input current requirement. The magnetic flux density of a permanent magnet is one of the important factors that determine the performance of the electromagnetic pump. The magnetic field for the flow channel of the helical-type DC electromagnetic pump was analyzed in which a Sm2Co17 permanent magnet was used to generate the Lorentz force for the circulation of liquid metal. The Lorentz force, which directly affected the developed pressure of the electromagnetic pump, was increased proportional to the magnetic flux density, which led to the increase in the velocity of the liquid metal in the flow channel. The permanent magnet in the +z and -z directions and the ferromagnetic material added in the r direction increased the magnitude of the magnetic flux density, which led the magnetic flux line to the flow channel. The arrangement of the permanent magnet system showed the optimized geometry of the inner ferromagnetic material with a radius of 110 mm and outer ferromagnetic material with a thickness of 30 mm and height of 70 mm. The average value of the magnetic flux density in the liquid-metal flow channel was 0.848 T under maximum condition by considering the mechanical and spatial restrictions.